Your Galaxy S22 no longer charges? It is no longer recognized by your computer?

In this detailed photo tutorial, we will show you step by step how to replace the USB board on your own.

Once you open your Galaxy its specified IP68 certification will expire.

To prevent the case and screen from scratches, make sure your workspace is clean and level.

We wish you good luck with your repair!

Required tools

  • Flat Picks

    Flat Picks

    You need a very flat tool such as a flat pick to pry out parts that are glued in place.

    €5.00 at the iDoc store
  • Heat gun

    Heat gun

    You can use a heat gun to heat parts that are glued on so they’re easier to remove. In most cases, you can also use a hairdryer.

    from €14.47 on Amazon
  • For storing screws

    For storing screws

    We recommend storing your screws so you don’t mix up the various screws and small parts.

    €10.00 at the iDoc store
  • Pick Set

    Pick Set

    You need a flat but stable tool such as a pick to pry out parts that are glued in place.

    €2.00 at the iDoc store
  • Plastic prying tool

    Plastic prying tool

    You need a flat plastic prying tool to disconnect the various plugs and connectors.

    €2.00 at the iDoc store
  • Phillips PH00 screwdriver

    Phillips PH00 screwdriver

    You need the right screwdriver for removing PH00 screws.

    €12.00 at the iDoc store

Required replacement part

Show all replacement parts for the Galaxy S22 Ultra 

Replacement parts and tools for this repair

Our tools plus the right spare part help you fix your device easily.

Getting started with the repair of your Galaxy S22 Ultra

If you get stuck or have questions, you can post a comment. We’d be happy to help.

21 steps
  1. Switching off your Samsung Galaxy S22 Ultra

    Galaxy S22 Ultra - Switching off your Samsung Galaxy S22 Ultra 01
    Galaxy S22 Ultra - Switching off your Samsung Galaxy S22 Ultra 02
    Galaxy S22 Ultra - Switching off your Samsung Galaxy S22 Ultra 03

    Use our checklist to test the basic functions of your Galaxy S22 Ultra 5G before repairing. This way you can check afterwards if your repair was successful.

    1. Press and hold the side and volume down button simultaneously for a few seconds.
    2. Tap on Power off in the displayed menu.
  2. Removing the SIM tray

    Galaxy S22 Ultra - Removing the SIM tray 01
    Galaxy S22 Ultra - Removing the SIM tray 02
    Galaxy S22 Ultra - Removing the SIM tray 03
    1. Press a SIM tool into the small opening of the SIM tray to push it out of the device frame.
    2. Then pull the tray completely out of the frame.
  3. Heating up the back cover

    Galaxy S22 Ultra - Heating up the back cover 01
    Galaxy S22 Ultra - Heating up the back cover 02
    Used tools
    Heat gun

    The edge of the back cover is heavily glued. Use a heat gun or an ordinary hair dryer to heat it sufficiently.
    1. Heat the edge of the back cover by running the hot air device evenly over it.
    Used tools
  4. Lifting up the back cover

    As an alternative to the suction cup, we can recommend the iSclack, which requires less force to lift up the back cover.

    The iFlex can be inserted particularly well between the back cover and the screen unit due to its sharp edges.

    1. Attach a suction cup to the lower edge of the back cover and pull it upwards to create a narrow gap.
    2. At the same time, insert a flat tool into the gap between the back cover and the screen unit.


  5. Detaching the back cover

    Galaxy S22 Ultra - Detaching the back cover 01
    Galaxy S22 Ultra - Detaching the back cover 02
    Galaxy S22 Ultra - Detaching the back cover 03
    Galaxy S22 Ultra - Detaching the back cover 04
    Galaxy S22 Ultra - Detaching the back cover 05
    Used tools
    Heat gun

    To avoid damaging the camera module, you should not insert your tool too far. At this point, the hard plastic pick is therefore particularly suitable.

    In order to prevent the glue of the back cover from bonding again, we recommend sliding flat plastic picks under the back cover at regular intervals.

    1. Drive your tool completely around the edge of the back cover to loosen it piece by piece.
    2. Put the detached back cover aside.


    Used tools
  6. Disconnecting NFC antenna and charging coil

    Galaxy S22 Ultra - Disconnecting NFC antenna and charging coil  01
    Galaxy S22 Ultra - Disconnecting NFC antenna and charging coil  02
    Galaxy S22 Ultra - Disconnecting NFC antenna and charging coil  03
    Galaxy S22 Ultra - Disconnecting NFC antenna and charging coil  04
    Used tools
    • Connector

    The lower end of the charging coil is glued. The upper end is a metal cover that is screwed onto the motherboard. On that cover the NFC antenna is integrated as well.

    1. Carefully separate the connectors of charging coil and NFC antenna from the board with a spudger.
    Used tools
  7. Detaching the charging coil

    • 5 × 3.3 mm Phillips

    We recommend using a screw storage, such as our magnetic pad, to keep all disassembled parts and screws safe and organized.

    1. Loosen the five Phillips screws that fix the metal cover on the board.
    2. Flip the detached cover upwards and pull the lower, glued end of the charging coil off the speaker.
  8. Disconnecting the battery

    Galaxy S22 Ultra - Disconnecting the battery 01
    Galaxy S22 Ultra - Disconnecting the battery 02
    Galaxy S22 Ultra - Disconnecting the battery 03
    Galaxy S22 Ultra - Disconnecting the battery 04
    Used tools
    • Connector

    To avoid a potential short circuit during the repair, you should always disconnect the battery as soon as possible.

    When separating connectors, always start from the side where there are no small components on the board. This way you avoid potential damage.
    1. Carefully detach the orange battery connector with a spudger from the motherboard.
    Used tools
  9. Removing the speaker

    • 6 × 3.3. mm Phillips

    A small arrow as well as a notch on the component show you where you can best place your tool.

    1. Loosen the six Phillips screws that hold the speaker in place.
    2. Carefully lever the speaker out of its guide with a spudger and set it aside.
  10. Separating the connecting cables

    Galaxy S22 Ultra - Separating the connecting cables 01
    Galaxy S22 Ultra - Separating the connecting cables 02
    Galaxy S22 Ultra - Separating the connecting cables 03
    Galaxy S22 Ultra - Separating the connecting cables 04
    Used tools
    • Connector
    1. Separate the two connecting cables from the motherboard and the USB board with a spudger.
    2. Put the disconnected cables aside.
    Used tools
  11. The right tools for your repair

    With the right tools, you will succeed in any repair. In our store you will find a large selection of professional quality tools.
    VIEW NOW
  12. Removing the USB board

    • 3 × 3.3 mm Phillips
    1. Loosen the three Phillips screws that secure the USB board.
    2. Then lever the loosened board out of the device.
  13. Inserting the new USB board

    • 3 × 3.3 mm Phillips

    When inserting the USB board, make sure that the charging jack is properly inserted into the edge of the case.

    1. Put the new USB board in the screen unit.
    2. Fix it with the three Phillips screws.
    Verwendete Ersatzteile
  14. Attaching the connecting cables

    Galaxy S22 Ultra - Attaching the connecting cables 01
    Galaxy S22 Ultra - Attaching the connecting cables 02
    Galaxy S22 Ultra - Attaching the connecting cables 03
    Galaxy S22 Ultra - Attaching the connecting cables 04
    • Connector

    The cable labeling will help you align them in the device.

    Be especially careful when attaching connectors and never press them down with force. A damaged connector can lead to the failure of an entire component.

    1. Align both connecting cables one after the other in the device and attach their two connectors on the USB and motherboard each.
  15. Installing the speaker

    • 6 × 3.3 mm Phillips

    Make sure that the speaker sits level all over. Its plastic lugs must fit into the edge of the case.

    1. Put the speaker back in its original position.
    2. Screw it in place with the six Phillips screws.
  16. Connecting the battery

    Galaxy S22 Ultra - Connecting the battery 01
    Galaxy S22 Ultra - Connecting the battery 02
    Galaxy S22 Ultra - Connecting the battery 03
    • Connector


    Always connect the battery as late as possible to avoid a potential short circuit.

    1. Reconnect the battery by gently pressing its connector onto the motherboard.
  17. Installing the charging coil

    • 5 × 3.3 mm Phillips
    1. Align the charging coil over the motherboard again, according to the screw holes in the metal cover.
    2. Press its glued end tightly.
    3. Screw the cover in place with the five Phillips screws.
  18. Connecting NFC antenna and charging coil

    Galaxy S22 Ultra - Connecting NFC antenna and charging coil 01
    Galaxy S22 Ultra - Connecting NFC antenna and charging coil 02
    Galaxy S22 Ultra - Connecting NFC antenna and charging coil 03
    Galaxy S22 Ultra - Connecting NFC antenna and charging coil 04
    • Connector
    1. Reconnect the NFC antenna and charging coil by gently pressing their connectors onto the motherboard.
  19. Testing the new USB board

    Galaxy S22 Ultra - Testing the new USB board 01
    Galaxy S22 Ultra - Testing the new USB board 02
    Galaxy S22 Ultra - Testing the new USB board 03
    Galaxy S22 Ultra - Testing the new USB board 04

    We recommend testing the new USB board and other basic functions at this point. Again, use our checklist for this and the internal Samsung test menu, which you call up via the code *#0*#.

    If something doesn't work properly, double-check that everything is installed and connected correctly.

    1. Connect your Galaxy to the power supply to see if your Galaxy is charging.
    2. Also check if it is recognized by your PC or Mac.
  20. Attaching a new adhesive frame (optional)

    If the adhesive frame is still in good condition, you do not need to install a new one. However, if it has defects or no longer sticks properly, we recommend that you use a new adhesive frame.

    1. Align the new adhesive frame with the back cover. The cutouts in the film will help you.
    2. Peel off the carrier film from the bottom of the adhesive frame and press it onto the edge of the back cover.
    3. Now carefully peel off the remaining protective film from the top of the adhesive frame.
    Used tools
    Verwendete Ersatzteile
  21. Attaching the back cover

    Galaxy S22 Ultra - Attaching the back cover 01
    Galaxy S22 Ultra - Attaching the back cover 02
    Galaxy S22 Ultra - Attaching the back cover 03
    Used tools
    Heat gun

    We recommend that you run hot air over the edge of the back cover again, so that the glue bonds properly. You can also weigh down your device with books for a few minutes.

    1. Close your Galaxy S22 Ultra after the repair by pressing the back cover back onto the screen unit.
    Used tools
  22. Inserting the SIM tray

    Galaxy S22 Ultra - Inserting the SIM tray 01
    Galaxy S22 Ultra - Inserting the SIM tray 02

    Make sure to insert the SIM tray the right way around.

    1. Re-insert the SIM tray. It must hear and feel it click into place.
Ø 0 (0 Ratings)

Bewerte unsere Anleitung

Hat dir unsere Anleitung weitergeholfen? Wir sind auf deine Beurteilung gespannt.

Submit rating

Submit rating

How did you like this repair guide?

Exceptional

Similar guides

You might also be interested in these guides.

You might be interested in

Get in touch with iDoc

Please contact our customer service for any questions about iDoc's products and services.

  • Send a message

    If you have a question about a guide or want to give us general feedback, just use our contact form

    Write a message
  • Free shipping

    From a minimum order value of 79.00 € your order will be shipped free of charge within Germany.

  • Call iDoc

    If you have any questions about our guides or services, call us from Monday to Friday, 10:00 a.m. to 6:00 p.m.

    +49 30 200 514 455
  • 5 star service

    We offer top quality and service. Our customers confirm this as well.

    Show reviews

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN