The screen of your Galaxy S22 Ultra is broken? The touch screen does not work properly anymore?

Then it's time to replace the screen. In this detailed photo tutorial, we will show you step by step how to do it best.

Once you open your Galaxy its specified IP68 certification will expire.

If the glass of your screen is heavily cracked, secure it with parcel tape beforehand to avoid potential injuries during the repair.

To prevent the replacement screen from scratches during assembly, make sure your workspace is clean and level.

We wish you good luck with your repair!

Required tools

  • Tool for prying out batteries

    Tool for prying out batteries

    You have to use a very stable tool to pry out the battery. At the same time, it has to be flat enough to insert below the battery.

    from €10.99 on Amazon
  • Flat Picks

    Flat Picks

    You need a very flat tool such as a flat pick to pry out parts that are glued in place.

    from €11.95 on Amazon
  • Heat gun

    Heat gun

    You can use a heat gun to heat parts that are glued on so they’re easier to remove. In most cases, you can also use a hairdryer.

    from €15.99 on Amazon
  • iPlastix Opening Tool

    iPlastix Opening Tool

    Do you want to open your smartphone or lever out large parts like the battery? Then the iPlastix with its large blade will help you. The practical assistant is made of flexible, especially sturdy plastic and lies comfortably in the hand. Thanks to its design, you can even get into smaller gaps, for example to lift the screen or to prevent it from sticking together again.

    on Amazon
  • For storing screws

    For storing screws

    We recommend storing your screws so you don’t mix up the various screws and small parts.

    from €10.99 on Amazon
  • Tweezers

    Tweezers

    We recommend using tweezers to remove screws and various small parts from your device.

    on Amazon
  • Pick Set

    Pick Set

    You need a flat but stable tool such as a pick to pry out parts that are glued in place.

    from €14.99 on Amazon
  • Plastic prying tool

    Plastic prying tool

    You need a flat plastic prying tool to disconnect the various plugs and connectors.

    from €14.99 on Amazon
  • Phillips PH00 screwdriver

    Phillips PH00 screwdriver

    You need the right screwdriver for removing PH00 screws.

    from €10.84 on Amazon

Required replacement part

Show all replacement parts for the Galaxy S22 Ultra 

Getting started with the repair of your Galaxy S22 Ultra

If you get stuck or have questions, you can post a comment. We’d be happy to help.

35 steps
  1. Switching off your Samsung Galaxy S22 Ultra

    Galaxy S22 Ultra - Switching off your Samsung Galaxy S22 Ultra 01
    Galaxy S22 Ultra - Switching off your Samsung Galaxy S22 Ultra 02
    Galaxy S22 Ultra - Switching off your Samsung Galaxy S22 Ultra 03

    Use our checklist to test the basic functions of your Galaxy S22 Ultra 5G before repairing. This way you can check afterwards if your repair was successful.

    1. Press and hold the side and volume down button simultaneously for a few seconds.
    2. Tap on Power off in the displayed menu.
  2. Removing the SIM tray and S-pen

    Galaxy S22 Ultra - Removing the SIM tray and S-pen 01
    Galaxy S22 Ultra - Removing the SIM tray and S-pen 02
    Galaxy S22 Ultra - Removing the SIM tray and S-pen 03
    Galaxy S22 Ultra - Removing the SIM tray and S-pen 04
    Used tools
    SIM Tool
    1. Press a SIM tool into the small opening of the SIM tray to push it out of the device frame.
    2. Then pull the tray completely out of the frame.
    3. Subsequently, remove the S-pen as well.
    Used tools
  3. Heating up the back cover

    Galaxy S22 Ultra - Heating up the back cover 01
    Galaxy S22 Ultra - Heating up the back cover 02
    Used tools
    Heat gun

    The edge of the back cover is heavily glued. Use a heat gun or an ordinary hair dryer to heat it sufficiently.
    1. Heat the edge of the back cover by running the hot air device evenly over it.
    Used tools
  4. Lifting up the back cover

    Galaxy S22 Ultra - Lifting up the back cover 01
    Galaxy S22 Ultra - Lifting up the back cover 02
    Galaxy S22 Ultra - Lifting up the back cover 03
    Galaxy S22 Ultra - Lifting up the back cover 04
    Galaxy S22 Ultra - Lifting up the back cover 05
    Used tools
    Flat Picks
    iFlex Opening Tool
    iSclack evo Opening Tool
    VAKUPLASTIC Suction Cup

    As an alternative to the suction cup, we can recommend the iSclack, which requires less force to lift up the back cover.

    The iFlex can be inserted particularly well between the back cover and the screen unit due to its sharp edges.

    1. Attach a suction cup to the lower edge of the back cover and pull it upwards to create a narrow gap.
    2. At the same time, insert a flat tool into the gap between the back cover and the screen unit.


    Used tools
    iFlex Opening Tool
    iSclack evo Opening Tool
    VAKUPLASTIC Suction Cup
  5. Detaching the back cover

    Galaxy S22 Ultra - Detaching the back cover 01
    Galaxy S22 Ultra - Detaching the back cover 02
    Galaxy S22 Ultra - Detaching the back cover 03
    Galaxy S22 Ultra - Detaching the back cover 04
    Galaxy S22 Ultra - Detaching the back cover 05
    Used tools
    Heat gun
    Pick Set
    Flat Picks

    To avoid damaging the camera module, you should not insert your tool too far. At this point, the hard plastic pick is therefore particularly suitable.

    In order to prevent the glue of the back cover from bonding again, we recommend sliding flat plastic picks under the back cover at regular intervals.

    1. Drive your tool completely around the edge of the back cover to loosen it piece by piece.
    2. Put the detached back cover aside.


    Used tools
  6. Disconnecting NFC antenna and charging coil

    Galaxy S22 Ultra - Disconnecting NFC antenna and charging coil  01
    Galaxy S22 Ultra - Disconnecting NFC antenna and charging coil  02
    Galaxy S22 Ultra - Disconnecting NFC antenna and charging coil  03
    Galaxy S22 Ultra - Disconnecting NFC antenna and charging coil  04
    Used tools
    Pry Tool
    • Connector

    The lower end of the charging coil is glued. The upper end is a metal cover that is screwed onto the motherboard. On that cover the NFC antenna is integrated as well.

    1. Carefully separate the connectors of charging coil and NFC antenna from the board with a spudger.
    Used tools
  7. Detaching the charging coil

    Galaxy S22 Ultra - Detaching the charging coil 01
    Galaxy S22 Ultra - Detaching the charging coil 02
    Galaxy S22 Ultra - Detaching the charging coil 03
    Galaxy S22 Ultra - Detaching the charging coil 04
    Galaxy S22 Ultra - Detaching the charging coil 05
    Used tools
    Pry Tool
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
    • 5 × 3.3 mm Phillips

    We recommend using a screw storage, such as our magnetic pad, to keep all disassembled parts and screws safe and organized.

    1. Loosen the five Phillips screws that fix the metal cover on the board.
    2. Flip the detached cover upwards and pull the lower, glued end of the charging coil off the speaker.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
  8. Disconnecting the battery

    Galaxy S22 Ultra - Disconnecting the battery 01
    Galaxy S22 Ultra - Disconnecting the battery 02
    Galaxy S22 Ultra - Disconnecting the battery 03
    Galaxy S22 Ultra - Disconnecting the battery 04
    Used tools
    Pry Tool
    • Connector

    To avoid a potential short circuit during the repair, you should always disconnect the battery as soon as possible.

    When separating connectors, always start from the side where there are no small components on the board. This way you avoid potential damage.
    1. Carefully detach the orange battery connector with a spudger from the motherboard.
    Used tools
  9. Removing the speaker

    Galaxy S22 Ultra - Removing the speaker 01
    Galaxy S22 Ultra - Removing the speaker 02
    Galaxy S22 Ultra - Removing the speaker 03
    Galaxy S22 Ultra - Removing the speaker 04
    Galaxy S22 Ultra - Removing the speaker 05
    Used tools
    Menda ESD Spudger
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
    • 6 × 3.3. mm Phillips

    A small arrow as well as a notch on the component show you where you can best place your tool.

    1. Loosen the six Phillips screws that hold the speaker in place.
    2. Carefully lever the speaker out of its guide with a spudger and set it aside.
    Used tools
    Menda ESD Spudger
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
  10. Separating the connecting cables

    Galaxy S22 Ultra - Separating the connecting cables 01
    Galaxy S22 Ultra - Separating the connecting cables 02
    Galaxy S22 Ultra - Separating the connecting cables 03
    Galaxy S22 Ultra - Separating the connecting cables 04
    Used tools
    Pry Tool
    • Connector
    1. Separate the two connecting cables from the motherboard and the USB board with a spudger.
    2. Put the disconnected cables aside.
    Used tools
  11. Separating the screen cable

    Galaxy S22 Ultra - Separating the screen cable 01
    Galaxy S22 Ultra - Separating the screen cable 02
    Galaxy S22 Ultra - Separating the screen cable 03
    Galaxy S22 Ultra - Separating the screen cable 04
    Used tools
    Pry Tool
    • Connector

    The screen cable of the S22 Ultra can be fully removed. The lower part of the cable is connected to a separate slot that lies slightly recessed in the screen unit.

    1. Carefully separate the two connectors of the screen cable with a spudger.
    2. Take the disconnected cable out of your device.
    Used tools
  12. Heating up the battery's adhesive

    Galaxy S22 Ultra - Heating up the battery's adhesive 01
    Galaxy S22 Ultra - Heating up the battery's adhesive 02
    Galaxy S22 Ultra - Heating up the battery's adhesive 03
    Used tools
    Heat gun

    The battery of the S22 Ultra is heavily glued into the display unit. In order to loosen it safely, you need to heat up the glue in advance.

    Never heat the heat-sensitive battery directly, but only from the edge of the case or the side of the screen glass.

    1. Heat the battery by running a hot air gun evenly over the case edge and the corresponding opposite area on the screen.
    Used tools
  13. Removing the battery

    Galaxy S22 Ultra - Removing the battery 01
    Galaxy S22 Ultra - Removing the battery 02
    Galaxy S22 Ultra - Removing the battery 03
    Used tools
    iPlastix Opening Tool
    Battery Spudger

    The battery can be loosened particularly well if you move the iPlastix under the battery with a cutting motion.

    1. Place a battery spudger on the lower edge of the battery and carefully lift it upwards.
    2. Remove the detached battery from the device.
    3. Insert the flat iPlastix under the battery at the lifted edge and detach the battery bit by bit from the bottom of the screen unit.
    Used tools
    iPlastix Opening Tool
    Battery Spudger
  14. Removing the USB board

    Galaxy S22 Ultra - Removing the USB board 01
    Galaxy S22 Ultra - Removing the USB board 02
    Galaxy S22 Ultra - Removing the USB board 03
    Galaxy S22 Ultra - Removing the USB board 04
    Galaxy S22 Ultra - Removing the USB board 05
    Used tools
    Pry Tool
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
    • 3 × 3.3 mm Phillips
    1. Loosen the three Phillips screws that secure the USB board.
    2. Then lever the loosened board out of the device.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
  15. Removing the board cover

    Galaxy S22 Ultra - Removing the board cover 01
    Galaxy S22 Ultra - Removing the board cover 02
    Galaxy S22 Ultra - Removing the board cover 03
    Galaxy S22 Ultra - Removing the board cover 04
    Galaxy S22 Ultra - Removing the board cover 05
    Used tools
    Pry Tool
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
    • Connector
    • 3 × 3.3 mm Phillips

    Before you can remove the motherboard, you need to remove the board cover on top of it.

    1. First, separate the connector of the cover from the motherboard.
    2. Loosen the three Phillips screws that hold it in place.
    3. Lift the cover up and remove it from the device.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
  16. Separate connectors from the motherboard

    Galaxy S22 Ultra - Separate connectors from the motherboard 01
    Galaxy S22 Ultra - Separate connectors from the motherboard 02
    Galaxy S22 Ultra - Separate connectors from the motherboard 03
    Galaxy S22 Ultra - Separate connectors from the motherboard 04
    Galaxy S22 Ultra - Separate connectors from the motherboard 05
    Used tools
    Pry Tool
    • Connector
    1. Separate the three remaining connectors from the motherboard. These belong to the S Pen and the front camera.
    Used tools
  17. Removing the motherboard

    Galaxy S22 Ultra - Removing the motherboard 01
    Galaxy S22 Ultra - Removing the motherboard 02
    Galaxy S22 Ultra - Removing the motherboard 03
    Galaxy S22 Ultra - Removing the motherboard 04
    Galaxy S22 Ultra - Removing the motherboard 05
    Used tools
    Pry Tool
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
    • 1 × 3.3 mm Phillips

    Be careful when removing the motherboard, to avoid damaging the still connected main camera as well as the flex cables of the connectors.

    1. Loosen the single Phillips screw that secures the board.
    2. Then use a spudger to carefully lever the loosened board out of the device.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    Magnetic Pad
  18. The right tools for your repair

    With the right tools, you will succeed in any repair. In our store you will find a large selection of professional quality tools.
    VIEW NOW
  19. Removing the front camera

    Galaxy S22 Ultra - Removing the front camera 01
    Galaxy S22 Ultra - Removing the front camera 02
    Galaxy S22 Ultra - Removing the front camera 03
    Galaxy S22 Ultra - Removing the front camera 04
    Used tools
    Heat gun
    Piergiacomi Tweezers 2a SA ESD

    The front camera is heavily glued in the screen unit. Therefore, you should heat it for a sufficiently long time to be able to remove it more easily.

    1. Carefully lever the camera out of its guide by gently running ESD tweezers between the adhesive layer and the camera guide.
    2. Put the detached camera aside.

    Used tools
    Piergiacomi Tweezers 2a SA ESD
  20. Preparing the new display

    Galaxy S22 Ultra - Preparing the new display 01
    Galaxy S22 Ultra - Preparing the new display 02
    Galaxy S22 Ultra - Preparing the new display 03
    Used tools
    Piergiacomi Tweezers 2a SA ESD
    Verwendete Ersatzteile
    Samsung Galaxy S22 Ultra Screen Black
    1. Prepare your replacement screen by removing all protective films from the screen's inside.
    2. In order to protect the screen from scratches, you can leave the film over the screen glass on until the end of the repair.
    Used tools
    Piergiacomi Tweezers 2a SA ESD
    Verwendete Ersatzteile
    Samsung Galaxy S22 Ultra Screen Black
  21. Inserting the front camera

    Galaxy S22 Ultra - Inserting the front camera 01
    Galaxy S22 Ultra - Inserting the front camera 02
    Galaxy S22 Ultra - Inserting the front camera 03
    1. Put the front camera back into its guide and press it firmly.
  22. Installing the motherboard

    Galaxy S22 Ultra - Installing the motherboard 01
    Galaxy S22 Ultra - Installing the motherboard 02
    Galaxy S22 Ultra - Installing the motherboard 03
    Galaxy S22 Ultra - Installing the motherboard 04
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    • 1 × 3.3 mm Phillips

    Make sure not to pinch any connectors or flexcables when inserting the motherboard. If necessary, hold them aside.

    1. Put the board back into your device. It must sit level all over.
    2. Fix it with the single Phillips screw.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
  23. Attaching connectors on the motherboard

    Galaxy S22 Ultra - Attaching connectors on the motherboard 01
    Galaxy S22 Ultra - Attaching connectors on the motherboard 02
    Galaxy S22 Ultra - Attaching connectors on the motherboard 03
    Galaxy S22 Ultra - Attaching connectors on the motherboard 04
    Galaxy S22 Ultra - Attaching connectors on the motherboard 05
    • Connector

    Be especially careful when attaching connectors and never press them down with force. A damaged connector can lead to the failure of an entire component.

    1. Reconnect front camera and S Pen by gently pressing their connectors onto the board. You must hear and feel them click into place.
  24. Installing the board cover

    Galaxy S22 Ultra - Installing the board cover 01
    Galaxy S22 Ultra - Installing the board cover 02
    Galaxy S22 Ultra - Installing the board cover 03
    Galaxy S22 Ultra - Installing the board cover 04
    Galaxy S22 Ultra - Installing the board cover 05
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    • 3 × 3.3 mm Phillips
    • Connector

    The plastic lugs of the board cover must snap into the case frame audibly and noticeably. If they do not, the motherboard is probably not sitting completely flat.

    1. Place the board cover back on the motherboard.
    2. Fix the cover with the three Phillips screws.
    3. Carefully press its connector back onto the board.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
  25. Installing the USB board

    Galaxy S22 Ultra - Installing the USB board 01
    Galaxy S22 Ultra - Installing the USB board 02
    Galaxy S22 Ultra - Installing the USB board 03
    Galaxy S22 Ultra - Installing the USB board 04
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    • 3 × 3.3 mm Phillips

    When inserting the USB board, make sure that the charging jack is properly inserted into the edge of the case.

    1. Put the USB board back in the screen unit.
    2. Fix it with the three Phillips screws.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
  26. Inserting the battery

    Galaxy S22 Ultra - Inserting the battery 01
    Galaxy S22 Ultra - Inserting the battery 02
    Galaxy S22 Ultra - Inserting the battery 03
    1. Put the battery back into its guide and press it firmly. The remaining glue on the back of the battery is usually enough to securely reattach it.
  27. Attaching the screen cable

    Galaxy S22 Ultra - Attaching the screen cable 01
    Galaxy S22 Ultra - Attaching the screen cable 02
    Galaxy S22 Ultra - Attaching the screen cable 03
    Galaxy S22 Ultra - Attaching the screen cable 04
    • Connector

    The cable labeling will help you align it in the device.

    1. Align the screen cable in the device and attach its two connectors on the motherboard and the separate slot in the screen unit.
  28. Attaching the connecting cables

    Galaxy S22 Ultra - Attaching the connecting cables 01
    Galaxy S22 Ultra - Attaching the connecting cables 02
    Galaxy S22 Ultra - Attaching the connecting cables 03
    Galaxy S22 Ultra - Attaching the connecting cables 04
    • Connector

    The cable labeling will help you align them in the device.

    1. Align both connecting cables one after the other in the device and attach their connectors on the USB and motherboard each.
  29. Installing the speaker

    Galaxy S22 Ultra - Installing the speaker 01
    Galaxy S22 Ultra - Installing the speaker 02
    Galaxy S22 Ultra - Installing the speaker 03
    Galaxy S22 Ultra - Installing the speaker 04
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    • 6 × 3.3 mm Phillips

    Make sure that the speaker sits level all over. Its plastic lugs must fit into the edge of the case.

    1. Put the speaker back in its original position.
    2. Screw it in place with the six Phillips screws.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
  30. Connecting the battery

    Galaxy S22 Ultra - Connecting the battery 01
    Galaxy S22 Ultra - Connecting the battery 02
    Galaxy S22 Ultra - Connecting the battery 03
    • Connector


    Always connect the battery as late as possible to avoid a potential short circuit.

    1. Reconnect the battery by gently pressing its connector onto the motherboard.
  31. Installing the charging coil

    Galaxy S22 Ultra - Installing the charging coil 01
    Galaxy S22 Ultra - Installing the charging coil 02
    Galaxy S22 Ultra - Installing the charging coil 03
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    • 5 × 3.3 mm Phillips
    1. Align the charging coil over the motherboard again, according to the screw holes in the metal cover.
    2. Press its glued end tightly.
    3. Screw the cover in place with the five Phillips screws.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
  32. Connecting NFC antenna and charging coil

    Galaxy S22 Ultra - Connecting NFC antenna and charging coil 01
    Galaxy S22 Ultra - Connecting NFC antenna and charging coil 02
    Galaxy S22 Ultra - Connecting NFC antenna and charging coil 03
    Galaxy S22 Ultra - Connecting NFC antenna and charging coil 04
    • Connector
    1. Reconnect the NFC antenna and charging coil by gently pressing their connectors onto the motherboard.
  33. Testing the replacement screen

    Galaxy S22 Ultra - Testing the replacement screen 01
    Galaxy S22 Ultra - Testing the replacement screen 02
    Galaxy S22 Ultra - Testing the replacement screen 03
    Galaxy S22 Ultra - Testing the replacement screen 04

    We recommend testing the replacement screen and other basic functions at this point. Again, use our checklist for this and the internal Samsung test menu, which you call up via the code *#0*#.
    If something doesn't work properly during testing, double-check that everything is installed and attached correctly.

    1. Switch on your Galaxy again.
    2. Test the touch function by dragging an app across the screen.
  34. Attaching a new adhesive frame (optional)

    Galaxy S22 Ultra - Attaching a new adhesive frame (optional) 01
    Galaxy S22 Ultra - Attaching a new adhesive frame (optional) 02
    Galaxy S22 Ultra - Attaching a new adhesive frame (optional) 03
    Galaxy S22 Ultra - Attaching a new adhesive frame (optional) 04
    Galaxy S22 Ultra - Attaching a new adhesive frame (optional) 05
    Used tools
    Pry Tool
    Piergiacomi Tweezers 2a SA ESD
    Verwendete Ersatzteile
    Samsung Galaxy S22 Ultra Adhesive Frame for...

    If the adhesive frame is still in good condition, you do not need to install a new one. However, if it has defects or no longer sticks properly, we recommend that you use a new adhesive frame.

    1. Align the new adhesive frame with the back cover. The cutouts in the film will help you.
    2. Peel off the carrier film from the bottom of the adhesive frame and press it onto the edge of the back cover.
    3. Now carefully peel off the remaining protective film from the top of the adhesive frame.
    Used tools
    Piergiacomi Tweezers 2a SA ESD
    Verwendete Ersatzteile
    Samsung Galaxy S22 Ultra Adhesive Frame for...
  35. Attaching the back cover

    Galaxy S22 Ultra - Attaching the back cover 01
    Galaxy S22 Ultra - Attaching the back cover 02
    Galaxy S22 Ultra - Attaching the back cover 03
    Used tools
    Heat gun

    We recommend that you run hot air over the edge of the back cover again, so that the glue bonds properly. You can also weigh down your device with books for a few minutes.

    1. Close your Galaxy S22 Ultra after the repair by pressing the back cover back onto the screen unit.
    Used tools
  36. Inserting the SIM tray and S-pen

    Galaxy S22 Ultra - Inserting the SIM tray and S-pen 01
    Galaxy S22 Ultra - Inserting the SIM tray and S-pen 02
    Galaxy S22 Ultra - Inserting the SIM tray and S-pen 03

    Make sure to insert the SIM tray the right way around.

    1. Re-insert the SIM tray. It must hear and feel it click into place.
    2. Then also slide the S Pen back into its guide in the case frame.
Ø 5 (4 Ratings)

Bewerte unsere Anleitung

Hat dir unsere Anleitung weitergeholfen? Wir sind auf deine Beurteilung gespannt.

Submit rating

Submit rating

How did you like this repair guide?

Exceptional

Similar guides

You might also be interested in these guides.

You might be interested in

Get in touch with iDoc

Please contact our customer service for any questions about iDoc's products and services.

  • Send a message

    If you have a question about a guide or want to give us general feedback, just use our contact form

    Write a message
  • Free shipping

    From a minimum order value of 79.00 € your order will be shipped free of charge within Germany.

  • Call iDoc

    If you have any questions about our guides or services, call us from Monday to Friday, 10:00 a.m. to 6:00 p.m.

    +49 30 200 514 455
  • 5 star service

    We offer top quality and service. Our customers confirm this as well.

    Show reviews

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN