Huawei P9 lite - Replacing the back cover

The back of the enclosure is scratched or bent.

  • P9 lite
  • 2 Steps
  • Medium
  • 15 min.
Go to the guide

Introduction

In this guide, we show you how to replace your P9 lite's defective back cover. This repair can help if your back cover is scratched or bent, or you want a new color.

Required tools

  • Hartplastik-Plektren

    Hartplastik-Plektren

    You need a flat but stable tool such as a pick to pry out parts that are glued in place.

    €1.00 at the iDoc store
  • Suction cup

    Suction cup

    A suction cup is perfect for lifting smooth surfaces such as displays or rear glass panels.

    €2.00 at the iDoc store
Show all replacement parts for the P9 lite 

Replacement parts and tools for this repair

Our tools plus the right spare part help you fix your device easily.

Werkzeugset Samsung

Ganz gleich, welches Problem dein Handy hat - mit unserem Werkzeugset kannst du es bestimmt beheben. Dieses Reparaturset...

for €49.00

Getting started

If you get stuck or have questions, you can post a comment for each step. We’d be happy to help.

2 steps
  1. Removing the back cover

    P9 lite - Removing the back cover 01
    P9 lite - Removing the back cover 02
    P9 lite - Removing the back cover 03
    P9 lite - Removing the back cover 04
    P9 lite - Removing the back cover 05

    The back cover of the Huawei P9 Lite is clipped in all around the display unit.

    1. Attach the suction cup relatively far down. Then pull on the suction cup to lift the back cover.
    2. Then insert the pick between display unit and backcover and pry them apart.
    3. Release the back cover clip for clip around the entire device. If it doesn't work the first time, you can use a second pick or pull it a little harder with your fingers.
    4. The back cover is glued to the fingerprint sensor. You can use a heat gun to slightly heat the back cover and soften the glue.
    5. Once all the clips are released, you can remove the back cover.
  2. Attaching the back cover

    P9 lite - Attaching the back cover 01
    P9 lite - Attaching the back cover 02

    1. Place the back cover on the display unit and press it down all around to make it snap into place.

Ø 0 (0 Bewertungen)

Bewerte unsere Anleitung

Hat dir unsere Anleitung weitergeholfen? Wir sind auf deine Beurteilung gespannt.

Bewertung abgeben

Bewertung abgeben

Wie findest du unsere Reparatur-Anleitung P9 lite Replacing the back cover?

Exzellent

Similar guides

You might also be interested in these guides.

You might be interested in

Get in touch with iDoc

Please contact our customer service for any questions about iDoc's products and services.

  • Send a message

    If you have a question about a guide or want to give us general feedback, just use our contact form

    Write a message
  • Free shipping

    From a minimum order value of 39.00 € your order will be shipped free of charge within Germany.

  • Call iDoc

    If you have any questions about our guides or services, call us from Monday to Friday, 10:00 a.m. to 6:00 p.m.

    +49 30 200 514 455
  • 5 star service

    We offer top quality and service. Our customers confirm this as well.

    Show reviews