Remove the screen

Now you can start and take off the display.

The screen is very easy to damage. So you should only replace internal parts like the battery, if the display is already broken.It's better to heat the screen several times if you feel resistance, instead of bending it.The cable underneath is very sensitive. Never insert the tool more than 5 mm. Also don't use the tool as a lever, but run it flatly along the edges to release the glue.

1. First heat the glue around the edges with a hot air tool to about 60°C. Repeat and heat the display to the point where you can barely touch it.
2. Then attach a suction cup at the bottom of the display over the USB connector and pull on it.
3. Then slide a very thin, flat tool between the display and the frame and slide it around the edge to release one corner of the display.
4. Then slide a pick between frame and display. You can use other picks to get off the display all around. Don't insert any tool more than 5 mm!
5. When the glue is detached everywhere, you can lift the display off. Carefully fold the display to the top (as seen in the image), as there are still 2 flex cables attached.

The display is very thin. If the display badly broken, you have to scrape it out of the frame bit by bit. Scrape any glass residue out of the frame using a flat metal tool.