Attaching a new adhesive frame

Apple iPhone X

  1. iPhone X - Attaching a new adhesive frame 01
    Used tools
    Pry Tool
    Verwendete Ersatzteile
    iPhone X Adhesive frame for Screen

    After applying a new adhesive strip, the iPhone is again protected against dust and splash water, but it is not 100% waterproof.

    1. To ensure that the new adhesive frame fits properly everywhere, you must first remove all remaining adhesive residue on stainless steel and display frames.
    2. Align the adhesive frame correctly and then pull off the protective film from the underside of the adhesive frame.

    The corners of the adhesive frame are different and will help you align it correctly with your device's frame.

    1. Place the adhesive frame only on one edge of the frame at first and press it down firmly as you go.

    You can use the plastic spudger to press it down so that the frame is as smooth as possible.

    1. Then pull off the middle part of the protective film.
    2. Finally, remove the remaining protective film from the edge of the housing so that only a transparent adhesive film remains.

    You can leave the remaining protective film on the edge of the housing until you have connected the display and attached the cover plates. This prevents anything from sticking to the adhesive frame beforehand.




    Used tools
    Verwendete Ersatzteile
    iPhone X Adhesive frame for Screen

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN