Disconnecting the display connectors

1. The silver cover is fixed with five Phillips screws. Remove them (see figure 1) and place the screws in one section of the magnetic pad. Then you can remove the cover.
   1 x 3.1 mm Phillips screw
   3 x 1.3 mm Phillips screw
   1 x 1.8 mm Phillips screw
2. Now you see four overlapping connectors (see picture 2). Loosen them very carefully in the order shown below. To do this, gently go under the contact with the pointed side of the spudger and lift it up.
   Front camera/sensor/earpiece/ambient microphone
   Touch ID cable
   LCD
   Touchscreen