Attaching the backcover
Xiaomi Mi 9
-
- Check the adhesive on the edges of the back cover. If it's mostly intact, you can use it again and don't need any new glue.
- Make sure that the adhesive lies flat and does not wrinkle. If this is the case, warm it up a little and correct it with tweezers.
Also check the adhesive around the camera cover and correct it if necessary.
- If the adhesive frame is too loose or does not stick properly, use new adhesive.
- To do this, first remove all old adhesive residues from the back cover. Use hot air again to loosen the glue more easily.
- Then apply the new adhesive frame or thin double-sided tape to reglue the backcover.
- Position the back cover over the device and press it down when it is exactly in the center.
- Heat the glue one last time and press the backcover on. You can weigh the device down with books or use clamps to compress the glue as long as it cools down (about 10-20min).
7 verwandte Anleitungen
Der Schritt wird dir in diesen Anleitungen angezeigt