Samsung Galaxy S5 Neo screen repair guide

The screen is broken or remains black.

In this repair guide, we show you how to replace your Samsung Galaxy S5 Neo’s defective display unit on your own. You need this repair if the glass is cracked, the touchscreen no longer responds to touch, or the LCD remains black or flickers.

Required tools

Heat gun

Heat gun

You can use a heat gun to heat parts that are glued on so they’re easier to remove. In most cases, you can also use a hairdryer.
from €14.47 on Amazon
Menda ESD Spudger

Menda ESD Spudger

You need a flat plastic prying tool to disconnect the various plugs and connectors.
€7.00 at the iDoc store
Pick Set

Pick Set

You need a flat but stable tool such as a pick to pry out parts that are glued in place.
€2.00 at the iDoc store
Steel Laboratory Spatula

Steel Laboratory Spatula

You need a flat and sturdy prying tool to disconnect glued parts.
€5.00 at the iDoc store

Required replacement part

Samsung Galaxy S5 Neo Screen

Samsung Galaxy S5 Neo Screen

from €10.99 on Amazon

Show all replacement parts for the Galaxy S5 Neo

Passendes Werkzeug

Mit unserem Werkzeug gelingt dir die Reparatur.

Samsung Tool Kit, 17 pieces

for €45.00

Steps

9 Steps

Removing the back cover

Step 1

Removing the battery

Step 2

Detaching the display glass

Step 3

Disconnecting the display

Step 4

Removing the display

Step 5

Connecting the display

Step 6

Attaching the display

Step 7

Installing the battery

Step 8

Attaching the back cover

Step 9

Getting started with the repair of your Galaxy S5 Neo

If you get stuck or have questions, you can post a comment. We’d be happy to help.

9 steps

Removing the back cover
Put your finger in the appropriate hollow to detach the back cover from the chassis. This hollow is slightly above the standby button. The back cover is hooked onto the chassis.

Remove the back cover.
Removing the battery
Use your finger to lift the battery out of the device. There’s a hollow in the chassis where you can easily access the battery.

Remove the battery.
Detaching the display glass
The display glass is glued to the chassis. Heat the display with hot air so it’s easier to remove from the chassis.

Insert a pick between the display and the chassis, and use a suction cup to lift the display. Repeat this process for the entire device. If the glue is too strong, heat the display again.
Disconnecting the display
Lift the display glass and flip it over 180° at the top of the device.

Now the display is exposed. It’s glued to the chassis so you need to heat it with hot air before the next step.

Using the steel laboratory spatula, carefully detach the display. Insert the spatula between the display and the chassis.

Once the display is detached, you can carefully flip it over 180° just like the display glass. Note that the display unit is connected to the device under the display.

Removing the display
There’s a plastic part securing the display’s flexible flat cable. Detach this bar and remove it.

Using the pointed tip of the spudger, carefully disconnect the plug connection from the logic board.

Remove the display.
Connecting the display
Connect the new display to the logic board.

Position the bar above the plug connection again and secure it.
Attaching the display
Put the display in its original position on the chassis.

Firmly press the display onto the entire surface with your finger so the glue will hold the display on the chassis. You can also clamp the display and heat it.
Installing the battery
Put the battery in the appropriate slot in the chassis. Make sure the battery’s four gold contacts are touching the four gold springs in your device.
Attaching the back cover
Position the back cover on the chassis.

Use your finger to press the back cover firmly onto the entire device. The back cover has to hook onto the chassis. You can hear it click into place.