Is the battery of your Galaxy S10 getting weak? Or does it not charge anymore?

Then it is time to replace the battery. This detailed step-by-step guide explains how to do it best.

The repair is a bit more difficult, because the firmly adhered glass backcover has to be removed to get to the battery. Removing the backcover can take a little time, so make sure you allow enough time for the repair.

We wish you good luck with the replacement of your battery! And we are looking forward to your review on our repair guide!

Required tools

  • Tool for prying out batteries

    Tool for prying out batteries

    You have to use a very stable tool to pry out the battery. At the same time, it has to be flat enough to insert below the battery.

    €3.00 at the iDoc store
  • Flat Picks

    Flat Picks

    You need a very flat tool such as a flat pick to pry out parts that are glued in place.

    €3.00 at the iDoc store
  • Heat gun

    Heat gun

    You can use a heat gun to heat parts that are glued on so they’re easier to remove. In most cases, you can also use a hairdryer.

    from €14.47 on Amazon
  • For storing screws

    For storing screws

    We recommend storing your screws so you don’t mix up the various screws and small parts.

    €8.00 at the iDoc store
  • iFlex opening tool

    iFlex opening tool

    Opening your smartphone can be a very delicate operation, especially if the glue is very persistent. The blade of the flexible but sturdy iFlex measures just 0.15 mm, so it fits in even the smallest gaps, such as between the screen and the frame. The practical iFlex is made of stainless steel and sits comfortably in the hand. This makes it the perfect assistant for every smartphone repair.

    €9.00 at the iDoc store
  • iPlastix

    iPlastix

    Do you want to open your smartphone or lever out large parts like the battery? Then the iPlastix with its large blade will help you. The practical assistant is made of flexible, especially sturdy plastic and lies comfortably in the hand. Thanks to its design, you can even get into smaller gaps, for example to lift the screen or to prevent it from sticking together again.

    €9.00 at the iDoc store
  • Tweezers

    Tweezers

    We recommend using tweezers to remove screws and various small parts from your device.

    €10.00 at the iDoc store
  • Plastic prying tool

    Plastic prying tool

    You need a flat plastic prying tool to disconnect the various plugs and connectors.

    €3.00 at the iDoc store
  • Suction cup

    Suction cup

    A suction cup is perfect for lifting smooth surfaces such as displays or rear glass panels.

    €3.00 at the iDoc store
  • Phillips PH00 screwdriver

    Phillips PH00 screwdriver

    You need the right screwdriver for removing PH00 screws.

    €11.00 at the iDoc store

Required replacement part

Show all replacement parts for the Galaxy S10 

Replacement parts and tools for this repair

Our tools plus the right spare part help you fix your device easily.

Getting started with the repair of your Galaxy S10

If you get stuck or have questions, you can post a comment. We’d be happy to help.

13 steps
  1. Switching off your Samsung Galaxy S10

    Galaxy S10 - Switching off your Samsung Galaxy S10 01
    Galaxy S10 - Switching off your Samsung Galaxy S10 02
    Galaxy S10 - Switching off your Samsung Galaxy S10 03
    Galaxy S10 - Switching off your Samsung Galaxy S10 04
    1. Keep the Power button pressed until the option "Switch off" is shown on the display.
    2. Confirm the "Switch off" with your finger and wait until the screen is black.
  2. Heating up the back cover

    Galaxy S10 - Heating up the back cover 01
    Galaxy S10 - Heating up the back cover 02
    Used tools
    Heat gun

    The back cover is firmly glued. To loosen it, you have to heat it up first.

    1. First turn your Galaxy S10 with the display side down.

    To avoid scratches on the display screen, you should place your device on a clean, soft surface.

    1. Use a hot air device, such as a heat gun or a regular hairdryer, and drive it evenly over the edge of the back cover from the outside.

    As a rule of thumb, heat the edge of the back cover only to the point where you can still touch it without burning your fingers.

    Used tools
  3. Creating a gap

    Once opened, your Galaxy S10 is no longer waterproof, and the warranty for protection against dust and splashing water expires.The backcover is made of glass and can break very easily. Therefore, be extra careful and take your time.

    1. Place a suction cup at the bottom of the backcover and pull it upwards to create a narrow gap between the backcover and the housing frame.
    2. Insert a flat, sturdy tool into the created gap. Try to enlarge the gap by pushing the backcover with the tool additionally upwards. We use the iFlex for this.
    Used tools
  4. Detaching the back cover

    Galaxy S10 - Detaching the back cover 01
    Galaxy S10 - Detaching the back cover 02
    Galaxy S10 - Detaching the back cover 03
    Galaxy S10 - Detaching the back cover 04
    Used tools

    Take care not to insert your tool too far, so that you do not damage anything under the backcover.

    1. Use a flat plastic tool to go around the edge of the housing piece by piece. We use the iPlastix for this.

    The iFlex is made of thin, sturdy metal, making it easier to get into the gap between the back cover and the case frame. However, the sharp edges of the iFlex make it easier to scratch the frame. We therefore recommend that you use the iFlex only initially and continue with iPlastix, which is made of flexible plastic, as soon as possible.

    1. To prevent the adhesive from rebonding in the areas that have already been loosened, you should always heat the edge of the display and leave individual, flat picks in the device frame.
    2. Remove the detached back cover and put it aside.
    Used tools
  5. Removing the plastic cover

    • 8 × 3,9 mm Phillips

    Under the back cover there is a plastic cover which is connected to the coil for contactless charging and the NFC antenna.The cover is hooked onto the upper edge of the display unit, the coil is slightly glued.

    1. First unscrew the Phillips screws that hold the plastic cover in place.
    2. Slide a flat tool under the glued coil to carefully loosen it. We use a steel spatula for this purpose.
    3. Then lever the plastic cover with a lever tool from the upper edge of the display unit. For this purpose we use a plastic spudger.
    4. Now you can remove the cover including the coil and the NFC antenna.
  6. Disconnecting the battery

    Galaxy S10 - Disconnecting the battery 01
    Galaxy S10 - Disconnecting the battery 02
    Galaxy S10 - Disconnecting the battery 03
    Galaxy S10 - Disconnecting the battery 04
    Used tools
    • Battery connector

    Always lever from the side where there are no small components on the mainboard. This way you avoid potential damage to capacitors or ICs.

    1. Carefully disconnect the battery contact from the mainboard with the spudger.


    Used tools
  7. The right tools for your repair

    With the right tools, you will succeed in any repair. In our store you will find a large selection of professional quality tools.
    VIEW NOW
  8. Removing the battery

    Galaxy S10 - Removing the battery 01
    Galaxy S10 - Removing the battery 02
    Galaxy S10 - Removing the battery 03
    Galaxy S10 - Removing the battery 04
    Used tools
    Heat gun

    The battery is heavily stuck. The adhesive is only on the edge of the battery, not in the middle.

    Never heat the battery directly and bend it as little as possible when removing it to avoid damaging it.

    1. Heat the battery with the hot air tool from below over the display.
    2. Using a flat, stable tool to carefully lever the battery on all sides out of its lead. We recommend using a battery spudger or an iSesamo.
    3. Take the loosened battery out of your Galaxy S10 and put it aside.
    Used tools
  9. Preparing the battery

    Galaxy S10 - Preparing the battery 01
    Galaxy S10 - Preparing the battery 02
    Galaxy S10 - Preparing the battery 03
    Galaxy S10 - Preparing the battery 04
    Verwendete Ersatzteile
    1. To make sure that the new battery is flush with the device, first remove any adhesive residue remaining in on the inside of the display.
    2. Pull off all protective films over the adhesive surfaces of your replacement battery.

    If your replacement battery has no adhesive surfaces, you can apply thin, double-sided adhesive tape to its back. Apply the tape only to the edge of the battery so that the adhesive does not come into contact with the black area inside the display frame.

    Verwendete Ersatzteile
  10. Inserting the battery

    Galaxy S10 - Inserting the battery 01
    Galaxy S10 - Inserting the battery 02
    Galaxy S10 - Inserting the battery 03
    1. Place the battery back into its lead in the display unit.
    2. Press it firmly, so that the adhesive can bond better.
  11. Connecting the battery

    Galaxy S10 - Connecting the battery 01
    Galaxy S10 - Connecting the battery 02
    Galaxy S10 - Connecting the battery 03
    Galaxy S10 - Connecting the battery 04
    Galaxy S10 - Connecting the battery 05
    • Battery connector
    1. Now connect the battery connector on the mainboard by gently pressing it until it clicks into place.
  12. Installing the plastic cover

    • 8 × 3,9 mm Phillips
    1. Put the plastic cover back into your Galaxy S10 by hooking it into the top of the display unit.
    2. Then press the cover firmly with your fingers until it gently snaps into place.
    3. Fix the plastic cover with the 8 Phillips screws.
  13. Testing your Samsung Galaxy S10

    Galaxy S10 - Testing your Samsung Galaxy S10 01
    Galaxy S10 - Testing your Samsung Galaxy S10 02
    Galaxy S10 - Testing your Samsung Galaxy S10 03
    Galaxy S10 - Testing your Samsung Galaxy S10 04

    Test the functionality of your device before you fasten the backcover again. In particular, test the functions of the component you have replaced.

    1. Turn your device on and test it with Samsung's integrated test mode.
    2. Use the following key combination: *#0*#
    3. Follow the instructions in the test menu and test e.g. the display, cameras and sensors.
  14. Attaching the back cover

    Galaxy S10 - Attaching the back cover 01
    Galaxy S10 - Attaching the back cover 02
    Galaxy S10 - Attaching the back cover 03
    Used tools
    Heat gun

    If the adhesive frame at the edge of your back cover is no longer intact, you must carefully remove the adhesive residue and attach a new adhesive frame.
    A back cover with an intact adhesive frame can be reattached directly.

    1. Put the back cover back in its original position.
    2. Then press it down over the entire surface so that the adhesive can bond well again.

    To make the glue stick even better, you can also heat the edge of your Galaxy S10 with hot air and weigh it down with a few books.

    Used tools
    Verwendete Ersatzteile
Ø 0 (0 Ratings)

Bewerte unsere Anleitung

Hat dir unsere Anleitung weitergeholfen? Wir sind auf deine Beurteilung gespannt.

Submit rating

Submit rating

How did you like this repair guide?

Exceptional

Similar guides

You might also be interested in these guides.

You might be interested in

Get in touch with iDoc

Please contact our customer service for any questions about iDoc's products and services.

  • Send a message

    If you have a question about a guide or want to give us general feedback, just use our contact form

    Write a message
  • Free shipping

    From a minimum order value of 79.00 € your order will be shipped free of charge within Germany.

  • Call iDoc

    If you have any questions about our guides or services, call us from Monday to Friday, 10:00 a.m. to 6:00 p.m.

    +49 30 200 514 455
  • 5 star service

    We offer top quality and service. Our customers confirm this as well.

    Show reviews

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN