Installing the upper cover

1. Put the smaller cover upside down on the battery so you can connect the NFC antenna’s contact again.
2. Put the antenna contact back in the hollow on the cover. Firmly press the contact and the cover together so they’ll stick to each other.
3. Put the cover back in the right position on the motherboard.
4. Now put the larger cover back on. Make sure the little cover and the big cover hook onto each other.
5. Use the seven screws to attach the covers to the enclosure.
   5 x 2.7 mm PH00 Phillips screw
   2 x 3.7 mm T5 Torx screw