Remove the back cover
HUAWEI P10 lite
-
Be extra careful with this step, as splintered glass could injure you.
The back cover is glued to the display chassis. So you need to heat the back cover and pull it off using a suction cup.
- Place the suction cup as low as possible on the back cover, over the text.
- Pull on the suction cup while pressing the frame against the table using a pick. As soon as a gap between the frame and the cover opens, you can carefully stick in your pick.
- Move the pick along the device edges to unglue the cover all around.
- Carefully lift up the back cover. Fold it up along the short edge of the device. You should be able to see the flex cable now.
- There's a small tape strip over the flex cable connector on the back cover. Pull it off and then use tweezers to pull the cable out of its socket. Keep the tape strip to attach the flex cable later.
- Once the back cover is disconnected, you can put it aside.
2 verwandte Anleitungen
Der Schritt wird dir in diesen Anleitungen angezeigt