Connecting the display

1. Reattach the connectors (see figure 1). The touchscreen connector sometimes comes undone when you connect the LCD connector.
   Touchscreen
   LCD
   Front camera/sensor/earpiece/ambient microphone
2. Start your iPhone as soon as the connectors are securely attached. Check the function of the LCD, touchscreen, proximity sensor, front camera and earpiece.
   If the connectors aren’t connected properly, stripes will appear on the display or parts of the touchscreen won’t work.
   
3. Now attach the cover and screw it in place (see figure 2).
   1 x 1.7 mm Phillips screw (not magnetic)
   2 x 1.2 mm Phillips screws
   1 x 1.7 mm Phillips screw (magnetic)
Make sure you don’t screw the big 1.7 mm screw into a different thread because that could damage conductive paths on the logic board and cause a bluescreen.