SHIFT6m - Replacing the battery

SHIFT6m
5 Steps
Very easy

Replace the battery of your SHIFT6m

Is your battery power slowly declining? Simply replace the SHIFT6m battery yourself. The battery of the SHIFT6m is in contrast to many other common smartphone models not glued and can be replaced with almost no effort.

Required tools

Hard Plastic Picks

Hard Plastic Picks

You need a flat but stable tool such as a pick to pry out parts that are glued in place.
€2.00 at the iDoc store

Show all replacement parts for the SHIFT6m

Steps

5 Steps

Switch off the device

Step 1

Remove the back cover

Step 2

Remove the battery

Step 3

Insert the battery

Step 4

Attach the back cover

Step 5

Getting started with the repair of your SHIFT6m

If you get stuck or have questions, you can post a comment. We’d be happy to help.

5 steps

Switch off the device
Turn off your device by holding down the power button until the “Power off” option appears.
Use your finger to confirm that you want to shut down your SHIFT6m and wait until the screen goes blank.
Remove the back cover
The backcover of the SHIFT6m is not glued or screwed and can be removed without tools.
However, you can also use a plectrum to loosen the clips along the entire edge.

Use a plectrum or a fingernail to slide it into the small recess in the bottom left corner and pull up the backcover.

Then gradually loosen all clips all around. The back cover is hooked again around the fingerprint sensor. There you have to pull a little harder to loosen the backcover.

Remove the battery
You can easily remove the battery by lifting it by the notch in the lower right corner and removing it from the device.
Insert the battery
Put the battery back in its place.
Attach the back cover
Put the back cover back on.
The back cover has clips on the edge and around the opening of the fingerprint sensor.
Press the backcover everywhere until it fits properly.