Removing the Wi-Fi flex cable

Apple iPhone X

  1. iPhone X - Removing the Wi-Fi flex cable 01
    Used tools
    Heat gun
    Wiha PicoFinish Phillips Screwdriver PH00
    Piergiacomi Tweezers 2a SA ESD
    Steel Laboratory Spatula
    Wiha PicoFinish Y-Type Screwdriver Y000
    • 3 × 1,4 mm Phillips
    • 1 × 1,0 mm Y-Type
    • 1 × 1,5 mm Phillips
    • 1 × 1,1 mm Y-Type
    • 1 × 1,3 mm Phillips

    The Wi-Fi antenna cable is glued in the upper part of the iPhone X rear case and is additionally fixed with several screws. Some of the fews simultaneously fix small metal clamps in the rear case.

    Remember the orientation of the metal clamps before loosening them, so that you can screw them back on properly later.


    1. First remove all screws that are fixing a clamp.

    Make it easier for you to unscrew the clamps by holding them with tweezers while you unscrew the screws.

    1. Now remove all remaining screws.
    2. Heat the flex cable set and carefully remove it from the back cover with a steel spatula.
    3. Then take out the entire cable set.
    Used tools
    Wiha PicoFinish Phillips Screwdriver PH00
    Piergiacomi Tweezers 2a SA ESD
    Steel Laboratory Spatula
    Wiha PicoFinish Y-Type Screwdriver Y000

1 verwandte Anleitungen

Der Schritt wird dir in diesen Anleitungen angezeigt

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN