Installing the Lightning connector

• 2 × 1,3 mm Phillips
• 2 × 1,6 mm Phillips
• 1 × 2,6 mm Phillips

Make sure to align the flex cable of the Lightning connector correctly, otherwise the connector cannot be attached correctly to the logicboard. The two small white dots on the bottom of the back cover must be visible through the cut-outs in the flex cable (see Figure 4).

1. Put the flex cable of the Lightning connector back in its original position and press it flat on the bottom of the back cover.
2. Push the socket and the two golden microphones back into their leads on the edge of the rear case.
3. Fasten the whole unit with five screws and the small silver bracket.