Disconnecting the dock connector cable

1. Remove the two Phillips screws from the dock connection cable and remove the silver cover (see figure 1).
   1 x 1.1 mm Phillips screw
   1 x 1.4 mm Phillips screw
2. Put the screws and cover in the same compartment of your organizer tray. It’s easy to tell them apart.
3. Now you can carefully detach the connector by using the pointed tip of the spudger to lift the connector. Alternatively, you can also use your fingernail again (see figure 2).
4. Pull the flat cable that’s lightly glued in place off of the logic board and bend it carefully over the frame (see figure 3).