SHIFT6m - Replace the battery

Replace the battery of your SHIFT6m

  • SHIFT6m
  • 5 Steps
  • Very easy
Go to the guide

Introduction

Is your battery power slowly declining? Simply replace the SHIFT6m battery yourself. The battery of the SHIFT6m is in contrast to many other common smartphone models not glued and can be replaced with almost no effort.

Required tools

  • Hartplastik-Plektren

    Hartplastik-Plektren

    You need a flat but stable tool such as a pick to pry out parts that are glued in place.

    €1.00 at the iDoc store
Show all replacement parts for the SHIFT6m 

Getting started

If you get stuck or have questions, you can post a comment for each step. We’d be happy to help.

5 steps
  1. Switch off the device

    SHIFT6m - Switch off the device 01
    SHIFT6m - Switch off the device 02
    1. Turn off your device by holding down the power button until the “Power off” option appears.
    2. Use your finger to confirm that you want to shut down your SHIFT6m and wait until the screen goes blank.
  2. Remove the back cover

    SHIFT6m - Remove the back cover 01
    SHIFT6m - Remove the back cover 02
    SHIFT6m - Remove the back cover 03

    The backcover of the SHIFT6m is not glued or screwed and can be removed without tools.

    However, you can also use a plectrum to loosen the clips along the entire edge.

    1. Use a plectrum or a fingernail to slide it into the small recess in the bottom left corner and pull up the backcover.
    2. Then gradually loosen all clips all around. The back cover is hooked again around the fingerprint sensor. There you have to pull a little harder to loosen the backcover.
  3. Remove the battery

    SHIFT6m - Remove the battery 01
    SHIFT6m - Remove the battery 02

    You can easily remove the battery by lifting it by the notch in the lower right corner and removing it from the device.

  4. Insert the battery

    SHIFT6m - Insert the battery 01
    SHIFT6m - Insert the battery 02

    Put the battery back in its place.

  5. Attach the back cover

    SHIFT6m - Attach the back cover 01
    SHIFT6m - Attach the back cover 02
    SHIFT6m - Attach the back cover 03

    Put the back cover back on.

    1. The back cover has clips on the edge and around the opening of the fingerprint sensor.
    2. Press the backcover everywhere until it fits properly.
Ø 0 (0 Bewertungen)

Bewerte unsere Anleitung

Hat dir unsere Anleitung weitergeholfen? Wir sind auf deine Beurteilung gespannt.

Bewertung abgeben

Bewertung abgeben

Wie findest du unsere Reparatur-Anleitung SHIFT6m Replace the battery?

Exzellent

Similar guides

You might also be interested in these guides.

Get in touch with iDoc

Please contact our customer service for any questions about iDoc's products and services.

  • Send a message

    If you have a question about a guide or want to give us general feedback, just use our contact form

    Write a message
  • Free shipping

    From a minimum order value of 39.00 € your order will be shipped free of charge within Germany.

  • Call iDoc

    If you have any questions about our guides or services, call us from Monday to Friday, 10:00 a.m. to 6:00 p.m.

    +49 30 200 514 455
  • 5 star service

    We offer top quality and service. Our customers confirm this as well.

    Show reviews