Your Galaxy S20 no longer charges.

Your Samsung Galaxy S20 doesn't recognize your charger cable and can't be charged? Then replacing the USB board will help you fix this problem. In this repair guide we will show you how the individual steps of this repair work.

For each step you will find detailed photos and a short video summary. Just click on the play button in the upper right corner of each step.

And now good luck with the repair!

Required tools

  • Flat Picks

    Flat Picks

    You need a very flat tool such as a flat pick to pry out parts that are glued in place.

    €5.00 at the iDoc store
  • Heat gun

    Heat gun

    You can use a heat gun to heat parts that are glued on so they’re easier to remove. In most cases, you can also use a hairdryer.

    from €14.47 on Amazon
  • For storing screws

    For storing screws

    We recommend storing your screws so you don’t mix up the various screws and small parts.

    €10.00 at the iDoc store
  • iFlex Opening Tool

    iFlex Opening Tool

    Opening your smartphone can be a very delicate operation, especially if the glue is very persistent. The blade of the flexible but sturdy iFlex measures just 0.15 mm, so it fits in even the smallest gaps, such as between the screen and the frame. The practical iFlex is made of stainless steel and sits comfortably in the hand. This makes it the perfect assistant for every smartphone repair.

    €10.00 at the iDoc store
  • iPlastix Opening Tool

    iPlastix Opening Tool

    Do you want to open your smartphone or lever out large parts like the battery? Then the iPlastix with its large blade will help you. The practical assistant is made of flexible, especially sturdy plastic and lies comfortably in the hand. Thanks to its design, you can even get into smaller gaps, for example to lift the screen or to prevent it from sticking together again.

    €10.00 at the iDoc store
  • Plastic prying tool

    Plastic prying tool

    You need a flat plastic prying tool to disconnect the various plugs and connectors.

    €2.00 at the iDoc store
  • Phillips PH00 screwdriver

    Phillips PH00 screwdriver

    You need the right screwdriver for removing PH00 screws.

    €12.00 at the iDoc store

Required replacement part

Show all replacement parts for the Galaxy S20 

Passendes Werkzeug

Mit unserem Werkzeug gelingt dir die Reparatur.

for €40.00

Getting started with the repair of your Galaxy S20

If you get stuck or have questions, you can post a comment. We’d be happy to help.

12 steps
  1. Switching off the device

    Galaxy S20 - Switching off the device 01
    Galaxy S20 - Switching off the device 02
    Galaxy S20 - Switching off the device 03
    1. Switch off the device at the beginning to avoid short circuits during the repair.

    If the screen can no longer be used due to damage, the device is switched off by disconnecting the battery.




  2. Removing the back cover

    The Samsung Galaxy S20 is opened via the heavily bonded glass back cover.

    1. Heat the frame of the device with hot air to about 60-80 degrees. Heating it makes the backcover's adhesive easier to remove.
    2. Take a suction cup and place it on the bottom of the device.
    3. Pull the suction cup and guide your flat opening tool into the resulting gap.

    The iFlex opening tool, which is made of thin, strong metal, is very suitable for removing such glued back covers. Once inserted, we recommend using a plastic tool, as this will not scratch the frame and back cover.You can also use an iSclack instead of a suction cup. This tool works like a pair of pliers with suction cups on both sides.

    1. Insert a narrow plectrum into the already loosened part so that the glue does not reattach.
    2. Guide your tool along the entire edge of the back cover.
    Warm up the tool from time to time and work carefully to avoid breaking the glass. This step takes some time.
    1. In the area of the camera you should also take care not to insert your tool too far into the device.
    Please note: Once the device has been opened for the first time, a hundred percent protection against the ingress of dust and liquids can no longer be guaranteed.
    Used tools
  3. Removing the charging coil

    • 5 × 4,0 mm Phillips
    1. Remove the Phillips screws of equal length from the charging coil.

    An iDoc magnetic pad can help you sort screws and smaller components.

    1. The coil is slightly glued to the speaker. Loosen the glue and remove the cover. It is slightly hooked at the top end.
  4. Disconnecting the battery

    Galaxy S20 - Disconnecting the battery 01
    Galaxy S20 - Disconnecting the battery 02
    Galaxy S20 - Disconnecting the battery 03
    Galaxy S20 - Disconnecting the battery 04
    Used tools
    • Battery Connector
    1. Now disconnect the battery with a plastic spudger.

    Pay attention to the small components next to the battery connector. Lever from the other side to avoid accidentally damaging them.


    Used tools
  5. Removing the speaker

    Galaxy S20 - Removing the speaker 01
    Galaxy S20 - Removing the speaker 02
    Galaxy S20 - Removing the speaker 03
    Galaxy S20 - Removing the speaker 04
    Galaxy S20 - Removing the speaker 05
    • 5 × 4,0 mm Phillips
    1. Loosen the Phillips screws that secure the speaker in the unit.
    2. Then lift up the speaker and take it out.
  6. Removing the USB board

    Galaxy S20 - Removing the USB board 01
    Galaxy S20 - Removing the USB board 02
    Galaxy S20 - Removing the USB board 03
    Galaxy S20 - Removing the USB board 04
    Galaxy S20 - Removing the USB board 05
    Galaxy S20 - Removing the USB board 06
    • Connector
    • 3 × 4,0 mm Phillips

    In the lower part of the device is the USB board where the charging socket is located.

    1. Loosen the three screws.
    2. Use a spudger to lift the board slightly upwards and pull it carefully out of the frame.
  7. The right tools for your repair

    With the right tools, you will succeed in any repair. In our store you will find a large selection of professional quality tools.
    VIEW NOW
  8. Inserting the USB board

    Galaxy S20 - Inserting the USB board 01
    Galaxy S20 - Inserting the USB board 02
    Galaxy S20 - Inserting the USB board 03
    Galaxy S20 - Inserting the USB board 04
    Galaxy S20 - Inserting the USB board 05
    Galaxy S20 - Inserting the USB board 06
    Galaxy S20 - Inserting the USB board 07
    Galaxy S20 - Inserting the USB board 08
    • Connector
    • 3 × 4,0 mm Phillips
    1. To insert the board a bit easier, bend the long flex cables carefully to the back.
    2. Position the USB board diagonally at the bottom of the device and then push it into the frame.
    3. Fasten the Phillips screws.

    Make sure that it is properly positioned before you screw it in.

  9. Inserting the speaker

    Galaxy S20 - Inserting the speaker 01
    Galaxy S20 - Inserting the speaker 02
    Galaxy S20 - Inserting the speaker 03
    Galaxy S20 - Inserting the speaker 04
    • 5 × 4,0 mm Phillips
    1. Insert the speaker, press it down and screw it in place. Make sure it's hooked in at the bottom.
  10. Connecting the battery

    Galaxy S20 - Connecting the battery 01
    Galaxy S20 - Connecting the battery 02
    Galaxy S20 - Connecting the battery 03
    • Battery Connector
    1. Position the battery contact over its socket on the mainboard and press it down.
  11. Installing the charging coil

    Galaxy S20 - Installing the charging coil 01
    Galaxy S20 - Installing the charging coil 02
    Galaxy S20 - Installing the charging coil 03
    Galaxy S20 - Installing the charging coil 04
    • 5 × 4,0 mm Phillips
    1. Put on the metal cover with the charging coil.
    2. Hook it in at the top and fasten all screws.
  12. Testing the Galaxy S20

    Galaxy S20 - Testing the Galaxy S20 01
    Galaxy S20 - Testing the Galaxy S20 02
    Galaxy S20 - Testing the Galaxy S20 03
    Galaxy S20 - Testing the Galaxy S20 04
    Galaxy S20 - Testing the Galaxy S20 05
    1. Test your Galaxy S20 before you finally close the device.
    2. Switch on the device and open the telefone app.
    3. Here you enter *#0*# and a test menu opens.
    4. In the test menu you can test the display for pixel errors and check the touchscreen and other functions such as the camera, the speaker or the status LED.
    5. If everything is OK, you can lock your smartphone for good.
  13. Attaching the back cover

    Galaxy S20 - Attaching the back cover 01
    Galaxy S20 - Attaching the back cover 02
    Galaxy S20 - Attaching the back cover 03
    Galaxy S20 - Attaching the back cover 04
    Galaxy S20 - Attaching the back cover 05
    Galaxy S20 - Attaching the back cover 06
    Galaxy S20 - Attaching the back cover 07
    Galaxy S20 - Attaching the back cover 08
    1. Before you put the backcover back on you should check the glue. It should be evenly distributed on the edge of the backcover. Remove excess glue if necessary.
    2. If you like, you can also remove the old glue and use a new one.
    Please note, that even with a new adhesive frame a 100% protection against the ingress of dust and liquids can no longer be guaranteed.
    1. Before attaching a new adhesive frame, you must first remove all old adhesive residues on the backcover and frame. You can use a plastic supdger to scrape off some of the glue. Cleaning alcohol and a lint-free cloth can help to remove the residue.
    2. Check the alignment of the frame, then peel off the first protective film and apply the adhesive to the frame. Don't press it down yet, but check that it is properly seated on all sides. The adhesive should not protrude at anywhere.
    3. Press the adhesive down all around so that it bonds properly to the frame.
    4. Loosen the second foil. Make sure that the adhesive does not come off the frame.
    5. Position the backcover over the device and put it down slowly.
    6. Heat the backcover again with hot air so that the adhesive bonds again.
    7. As long as the glue cools down, you can press the backcover down with your fingers or weight it down with a few books.
Ø 0 (0 Ratings)

Bewerte unsere Anleitung

Hat dir unsere Anleitung weitergeholfen? Wir sind auf deine Beurteilung gespannt.

Submit rating

Submit rating

How did you like this repair guide?

Exceptional

Similar guides

You might also be interested in these guides.

You might be interested in

Get in touch with iDoc

Please contact our customer service for any questions about iDoc's products and services.

  • Send a message

    If you have a question about a guide or want to give us general feedback, just use our contact form

    Write a message
  • Free shipping

    From a minimum order value of 79.00 € your order will be shipped free of charge within Germany.

  • Call iDoc

    If you have any questions about our guides or services, call us from Monday to Friday, 10:00 a.m. to 6:00 p.m.

    +49 30 200 514 455
  • 5 star service

    We offer top quality and service. Our customers confirm this as well.

    Show reviews

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN