Transferring the buttons

1. Using the steel laboratory spatula, carefully detach the buttons for the volume rocker switch from the enclosure. Insert the spatula between the contacts and the enclosure to detach the glue.
2. Remove the buttons from the enclosure. Pull them up to remove them because they are inserted vertically in the enclosure.
3. The plastic rocker switch is slightly clamped in place in the display frame. Use the steel spatula or spudger to push out the plastic rocker switch from the inside.
4. Remove the rocker switch with the tweezers by pulling it out of the opening in the enclosure.
5. The plastic button for the standby button is also slightly clamped into the display frame. Push it out of the enclosure from the inside.
6. Remove the button from the enclosure.