Guide to take out the PCB for the OnePlus 5

Did your OnePlus 5 get wet? It's really easy to take out the logic board and clean it with contact spray.

The OnePlus 5 is fairly easy to fix, because the screen isn't glued to the frame and there aren't many different screw types. Unclipping the display is a little tricky, though.

Run a data backup before the repair, use a clean work surface and take enough time. If you have questions, use the live chat on our website or write a comment.

Required tools

  • iPlastix Opening Tool

    iPlastix Opening Tool

    Do you want to open your smartphone or lever out large parts like the battery? Then the iPlastix with its large blade will help you. The practical assistant is made of flexible, especially sturdy plastic and lies comfortably in the hand. Thanks to its design, you can even get into smaller gaps, for example to lift the screen or to prevent it from sticking together again.

    €10.00 at the iDoc store
  • Pick Set

    Pick Set

    You need a flat but stable tool such as a pick to pry out parts that are glued in place.

    €2.00 at the iDoc store
  • Plastic prying tool

    Plastic prying tool

    You need a flat plastic prying tool to disconnect the various plugs and connectors.

    €2.00 at the iDoc store
  • Steel Laboratory Spatula

    Steel Laboratory Spatula

    You need a flat and sturdy prying tool to disconnect glued parts.

    €4.00 at the iDoc store
  • Phillips PH00 screwdriver

    Phillips PH00 screwdriver

    You need the right screwdriver for removing PH00 screws.

    €12.00 at the iDoc store
  • Wiha PicoFinish Torx Screwdriver T1

    Wiha PicoFinish Torx Screwdriver T1

    €12.00 at the iDoc store
Show all replacement parts for the OnePlus 5 

Getting started with the repair of your OnePlus 5

If you get stuck or have questions, you can post a comment. We’d be happy to help.

14 steps
  1. Switch off device

    OnePlus 5 - Switch off device 01
    OnePlus 5 - Switch off device 02
    OnePlus 5 - Switch off device 03

    Turn off your OnePlus 5 completely to protect it from damage.

    1. Press and hold the standby button until the "Switch off" option appears.
    2. Tap again to confirm.
    3. If your OnePlus 5 touchscreen no longer works, you can also turn it off by pressing and holding the standby button for about 10-15 seconds.
  2. Removing the enclosure screws

    OnePlus 5 - Removing the enclosure screws 01
    • 2 × 2.5 mm Torx T1

    To open the OnePlus 5, you need a Torx T1 screwdriver. You can also work with a pentalobe screwdriver, although it doesn't fit right.

    1. Remove both screws on the bottom edge of the case. They are located to the right and left of the USB port and the audio jack.
    2. Place the screws on a common field of the magnetic mat or sorting box.
  3. Remove SIM tray

    OnePlus 5 - Remove SIM tray 01
    OnePlus 5 - Remove SIM tray 02

    Remove the SIM card holder with a SIM tool or paper clip. Push the tool into the small hole on the SIM tray and pull it out.

  4. Remove the back cover

    OnePlus 5 - Remove the back cover 01
    OnePlus 5 - Remove the back cover 02
    OnePlus 5 - Remove the back cover 03
    OnePlus 5 - Remove the back cover 04
    OnePlus 5 - Remove the back cover 05
    OnePlus 5 - Remove the back cover 06
    OnePlus 5 - Remove the back cover 07

    The OnePlus 5 consists of a back cover and a display unit. All the electronics and the screen are installed in the display unit. The back cover is designed as a case.

    Avoid scratches on the OnePlus 5 by placing it on a soft and clean surface.

    To lift off the back cover you need a suction cup, a flat opening tool (like the iPlastix) and a pick. If the screen is badly cracked, cover it with a strip of packing tape so that the suction cup can stick.

    1. Attach the suction cup over the home button. Pull on the suction cup and then slide in the iPlastix or a plastic pick between the display and the rear panel.
    2. A small gap should appear. Here you can insert the pick. It is best to use a hard plastic pick with stopper, so that won't slip too far into the device.
    3. Now slide the pick around the whole frame. You can twist the pick a little to lever off the display. The device is not glued, but clipped. Use the plectrum to release the clips one by one. When all clips are released, you can lift off the back cover. The clips at the upper edge come off last.
    4. The back shell is still connected with a sensitive flex cable. Lift up the back cover and hold it to prevent damaging the cable.
  5. Unplug the connectors

    OnePlus 5 - Unplug  the connectors 01
    OnePlus 5 - Unplug  the connectors 02
    OnePlus 5 - Unplug  the connectors 03
    • 1 × 2.3 mm Phillips
    • Battery connector
    • USB port connector

    The connectors for the battery and the back cover are under a bracket.

    1. Remove the screw from the bracket and remove the bracket. It is latched in on both ends.
    2. First disconnect the battery to avoid short circuits. Disconnect the battery connector with a plastic tool.
    3. Then disconnect the second connector. It connects the USB port to the mainboard.
  6. Remove the speaker

    OnePlus 5 - Remove the speaker 01
    OnePlus 5 - Remove the speaker 02
    OnePlus 5 - Remove the speaker 03
    • 6 × 2.3 mm Phillips
    1. Remove the 6 Phillips screws on the speaker unit.
    2. Then pry out the speaker with a flat tool.
    3. Now you can take it out of the device.
  7. Remove the mainboard

    OnePlus 5 - Remove the mainboard 01
    OnePlus 5 - Remove the mainboard 02
    OnePlus 5 - Remove the mainboard 03
    OnePlus 5 - Remove the mainboard 04
    OnePlus 5 - Remove the mainboard 05
    OnePlus 5 - Remove the mainboard 06
    • 7 × 2.3 mm Phillips
    • Connector
    1. First disconnect all connectors from the mainboard.
    2. Unplug the antenna connector with a slight twist of the tweezers.
    3. Unplug the connector of the large flex cable from the mainboard.
    4. Unplug the small coaxial plug of the WiFi antenna next to the camera.
    5. Remove the 7 Phillips screws from the mainboard. One of the screws has a moisture indicator sticker. You can remove this sticker and reuse it later or just throw it away.
    6. Unplug the flex cable running over the battery.
    7. The antenna cable is clipped onto the mainboard. Release the antenna cable from the bracket.
    8. Bend all cables to the side so that you can easily remove the mainboard.
    9. Now you can take the mainboard out of the device.

  8. The right tools for your repair

    With the right tools, you will succeed in any repair. In our store you will find a large selection of professional quality tools.
    VIEW NOW
  9. Insert the mainboard

    OnePlus 5 - Insert the mainboard 01
    OnePlus 5 - Insert the mainboard 02
    OnePlus 5 - Insert the mainboard 03
    OnePlus 5 - Insert the mainboard 04
    • 7 × 2.3 mm Phillips
    • Connector
    1. First bend away all connectors so they don't get stuck under the board.
    2. Put the motherboard into the device.
    3. Press it in lightly. Make sure that the rear camera is positioned correctly.
    4. Press the antenna cable into its clamp.
    5. Plug the connector of the large flex cable to the sub-board.
    6. Plug the connector of the small antenna to the top of the mainboard.
    7. Plug the large connector to the mainboard.
    8. Position the plug of the antenna cable and gently press it on so that you feel a light snap.
    9. Fasten the 7 screws of the mainboard.

    Be careful not to slip with the connectors, as the small pins may get damaged. You should feel the connectors engage with a light snap.

  10. Insert the speaker

    OnePlus 5 - Insert the speaker 01
    OnePlus 5 - Insert the speaker 02
    • 6 × 2.3 mm Phillips
    1. Put the speaker in its place.
    2. Fasten the 6 screws of the speaker unit.
  11. Attach the connectors

    OnePlus 5 - Attach the connectors 01
    OnePlus 5 - Attach the connectors 02
    OnePlus 5 - Attach the connectors 03
    OnePlus 5 - Attach the connectors 04
    OnePlus 5 - Attach the connectors 05
    OnePlus 5 - Attach the connectors 06
    OnePlus 5 - Attach the connectors 07
    • Connector
    1. Place the back cover perpendicular to the device.
    2. Attach the USB port connector to the main board.
    3. Attach the battery connector to the mainboard.
    4. Attach the bracket and make sure it's latched in at both ends.
    5. Fasten the screw of the bracket.
  12. Attach the back cover

    OnePlus 5 - Attach the back cover 01
    OnePlus 5 - Attach the back cover 02
    OnePlus 5 - Attach the back cover 03
    OnePlus 5 - Attach the back cover 04
    OnePlus 5 - Attach the back cover 05
    1. Put the back cover on the display unit. Attach the upper edge first. The backcover has three clips here.
    2. Clipping the device together takes some strength. It is best to grab the device with both hands and squeeze the edges together with your fingers.

    Press the device together with your fingers, not on the table, to avoid damaging the display.

  13. Insert the SIM tray

    OnePlus 5 - Insert the SIM tray 01
    1. Insert any SIM/SD cards and slide the tray back into the device.
  14. Fasten the back cover screws

    OnePlus 5 - Fasten the back cover screws 01
    • 2 × 2.5 mm Torx T1
    1. Fasten the two screws to the left and right of the USB port.
  15. Test the device

    OnePlus 5 - Test the device 01
    OnePlus 5 - Test the device 02
    OnePlus 5 - Test the device 03
    1. Check the minimum and maximum brightness of the display and check for pixel errors.
    2. Drag any app across the screen in a zig-zag pattern. If it doesn't jump, the touch function is OK.
    3. Also test other functions, such as the cameras, the speaker and the earpiece, using a recording app for example.
Ø 0 (0 Ratings)

Bewerte unsere Anleitung

Hat dir unsere Anleitung weitergeholfen? Wir sind auf deine Beurteilung gespannt.

Submit rating

Submit rating

How did you like this repair guide?

Exceptional

Similar guides

You might also be interested in these guides.

You might be interested in

Get in touch with iDoc

Please contact our customer service for any questions about iDoc's products and services.

  • Send a message

    If you have a question about a guide or want to give us general feedback, just use our contact form

    Write a message
  • Free shipping

    From a minimum order value of 79.00 € your order will be shipped free of charge within Germany.

  • Call iDoc

    If you have any questions about our guides or services, call us from Monday to Friday, 10:00 a.m. to 6:00 p.m.

    +49 30 200 514 455
  • 5 star service

    We offer top quality and service. Our customers confirm this as well.

    Show reviews

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN