New speaker for your P8 lite (2017)

Do you have trouble playing sounds or music from your P8 lite (2017) or you can't hear others on the phone? It's not hard to repair your P8 lite (2017)! Each step has detailed photos to guide you through this screen replacement.

To reach the speaker, you have to open the P8 lite (2017).

Run a data backup before the repair, use a clean work surface and take enough time.

Also check your spare part before installation. If you find any visible errors, please contact your vendor before starting!

If you have questions, use the live chat on our website or write a comment.

Required tools

  • Flat Picks

    Flat Picks

    You need a very flat tool such as a flat pick to pry out parts that are glued in place.

    €5.00 at the iDoc store
  • For storing screws

    For storing screws

    We recommend storing your screws so you don’t mix up the various screws and small parts.

    €10.00 at the iDoc store
  • iFlex Opening Tool

    iFlex Opening Tool

    Opening your smartphone can be a very delicate operation, especially if the glue is very persistent. The blade of the flexible but sturdy iFlex measures just 0.15 mm, so it fits in even the smallest gaps, such as between the screen and the frame. The practical iFlex is made of stainless steel and sits comfortably in the hand. This makes it the perfect assistant for every smartphone repair.

    €10.00 at the iDoc store
  • iPlastix Opening Tool

    iPlastix Opening Tool

    Do you want to open your smartphone or lever out large parts like the battery? Then the iPlastix with its large blade will help you. The practical assistant is made of flexible, especially sturdy plastic and lies comfortably in the hand. Thanks to its design, you can even get into smaller gaps, for example to lift the screen or to prevent it from sticking together again.

    €10.00 at the iDoc store
  • Plastic prying tool

    Plastic prying tool

    You need a flat plastic prying tool to disconnect the various plugs and connectors.

    €2.00 at the iDoc store
  • Steel Laboratory Spatula

    Steel Laboratory Spatula

    You need a flat and sturdy prying tool to disconnect glued parts.

    €4.00 at the iDoc store
  • Phillips PH00 screwdriver

    Phillips PH00 screwdriver

    You need the right screwdriver for removing PH00 screws.

    €12.00 at the iDoc store
Show all replacement parts for the P8 lite (2017) 

Passendes Werkzeug

Mit unserem Werkzeug gelingt dir die Reparatur.

for €40.00

Getting started with the repair of your P8 lite (2017)

If you get stuck or have questions, you can post a comment. We’d be happy to help.

10 steps
  1. Switch off the device

    P8 lite (2017) - Switch off  the device 01
    P8 lite (2017) - Switch off  the device 02
    1. Before your start the repair, switch off your device by holding down the standby button until the shutdown dialog appears on the screen.
    2. Tap to switch off the device.
  2. Remove back cover

    P8 lite (2017) - Remove back cover 01
    P8 lite (2017) - Remove back cover 02
    P8 lite (2017) - Remove back cover 03
    P8 lite (2017) - Remove back cover 04
    P8 lite (2017) - Remove back cover 05

    Now you can start and remove the back cover.

    It's better to heat the back cover several times if you feel resistance, instead of breaking it.Never insert the tool more than 5 mm. Also don't use the tool as a lever, but run it flatly along the edges to release the glue.

    1. First heat the glue around the edges with a hot air tool to about 60°C. Repeat and heat the back cover to the point where you can barely touch it.
    2. Then slide a very thin, flat tool like the iFlex between the back cover and the frame and slide it around the edge to release one corner of the back cover.
    3. Then slide in a pick. You can use other picks to get off the back cover all around. Don't insert any tool more than 5 mm!
    4. Slide the iFlex around the edges and detach the glue everywhere.
    5. When the glue is detached everywhere, you can lift the back cover off. Carefully open the device, as there is still one flex cable attached.
  3. Disconnect the battery

    P8 lite (2017) - Disconnect the battery 01
    P8 lite (2017) - Disconnect the battery 02
    P8 lite (2017) - Disconnect the battery 03
    P8 lite (2017) - Disconnect the battery 04
    • 2 × 2.8 mm Phillips
    • Battery connector

    First unplug the battery to protect the device against short circuits.

    1. Remove the screws on the bracket.
    2. Take out the bracket. It's latched in at the top.
    3. Unplug the connector with a plastic tool.
  4. Disconnect the fingerprint sensor

    P8 lite (2017) - Disconnect the fingerprint sensor 01
    P8 lite (2017) - Disconnect the fingerprint sensor 02
    P8 lite (2017) - Disconnect the fingerprint sensor 03
    P8 lite (2017) - Disconnect the fingerprint sensor 04
    P8 lite (2017) - Disconnect the fingerprint sensor 05
    • 1 × 2.8 mm Phillips
    • Fingerprint sensor

    Remove the fingerprint sensor to take off the back cover.

    1. Remove the bracket screw and take off the bracket. It's latched in at the top.
    2. Unplug the connector with a plastic tool
    3. Now you can remove the back cover.
  5. Remove the speaker

    P8 lite (2017) - Remove the speaker 01
    P8 lite (2017) - Remove the speaker 02
    P8 lite (2017) - Remove the speaker 03
    P8 lite (2017) - Remove the speaker 04
    • 5 × 2.8 mm Phillips
    • 2 × 3.8 mm Phillips
    1. Loosen the screws of the speaker unit and store them together.
    2. Pry out the speaker with a flat tool and take it out of the device.
  6. The right tools for your repair

    With the right tools, you will succeed in any repair. In our store you will find a large selection of professional quality tools.
    VIEW NOW
  7. Insert the speaker

    P8 lite (2017) - Insert the speaker 01
    P8 lite (2017) - Insert the speaker 02
    P8 lite (2017) - Insert the speaker 03
    P8 lite (2017) - Insert the speaker 04
    • 5 × 2.8 mm Phillips
    • 2 × 3.8 mm Phillips
    1. Place the speaker on the lower edge of the device first and insert it.
    2. Fasten the speaker's screws.
  8. Connect fingerprint sensor

    P8 lite (2017) - Connect fingerprint sensor 01
    P8 lite (2017) - Connect fingerprint sensor 02
    P8 lite (2017) - Connect fingerprint sensor 03
    P8 lite (2017) - Connect fingerprint sensor 04
    • Connector
    • 1 × 2.8 mm Phillips
    1. Put the back cover on the edge of the device and plug on the fingerprint connector.
    2. Attach the bracket. Make sure to latch it in and then fasten the screw.
  9. Connect the battery

    P8 lite (2017) - Connect the battery 01
    P8 lite (2017) - Connect the battery 02
    P8 lite (2017) - Connect the battery 03
    P8 lite (2017) - Connect the battery 04
    • Battery connector
    • 2 × 2.8 mm Phillips
    1. Attach the battery connector.
    2. Put on the bracket and make sure to latch it in.
    3. Fasten the screws of the bracket.
  10. Attach the back cover

    P8 lite (2017) - Attach the back cover 01
    P8 lite (2017) - Attach the back cover 02
    P8 lite (2017) - Attach the back cover 03
    1. Attach the back cover the right way around. Heat it again to make the glue softer and then press it on for a longer while so the glue can cool and bond.

    The fingerprint flex cable is very sensitive. Make sure you don't twist it.

  11. Test the device

    P8 lite (2017) - Test the device 01
    P8 lite (2017) - Test the device 02
    P8 lite (2017) - Test the device 03

    Now switch on your device and test all important functions:

    • Touch/brightness: test the highest and lowest brightness of your display. Drag any app across the screen in a zig-zag pattern. If the app follows your finger, the screen is ok.
    • Charging function (connect USB)
    • Front/back camera
    • Vibration motor
    • Volume/standby buttons
    • Earpiece / speaker / microphone
    • Flash
Ø 5 (1 Ratings)

Bewerte unsere Anleitung

Hat dir unsere Anleitung weitergeholfen? Wir sind auf deine Beurteilung gespannt.

Submit rating

Submit rating

How did you like this repair guide?

Exceptional

Similar guides

You might also be interested in these guides.

You might be interested in

Get in touch with iDoc

Please contact our customer service for any questions about iDoc's products and services.

  • Send a message

    If you have a question about a guide or want to give us general feedback, just use our contact form

    Write a message
  • Free shipping

    From a minimum order value of 79.00 € your order will be shipped free of charge within Germany.

  • Call iDoc

    If you have any questions about our guides or services, call us from Monday to Friday, 10:00 a.m. to 6:00 p.m.

    +49 30 200 514 455
  • 5 star service

    We offer top quality and service. Our customers confirm this as well.

    Show reviews

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN

Profi-Insights & Tipps für deine erfolgreiche Handy-Reparatur

iDoc schenkt dir den ultimativen Reparatur-Guide GUIDE GRATIS ANFORDERN