Installing the standby and flash cable
Apple iPhone Xs
-
- 2 × 1,7 mm Phillips
Before inserting the flex cable with the flash, make sure you do not forget the thin rubber frame.
- Insert the rubber frame into the opening and make sure it is aligned correctly.
- Also, check that the adhesive on the microphone is seated correctly and then place the microphone in its opening.
- Place the flash in its opening and position the metal holder of the standby button on the frame.
- Then glue the thin flex cable flat to the backcover and screw the metal bracket together.
1 verwandte Anleitungen
Der Schritt wird dir in diesen Anleitungen angezeigt