Removing the logic board

• Lightning Connector
• Wireless charging connector
• Antenna connector
• Front camera & FaceID connector
• Standby & flashlight connector
• Mute & volume button connector
• 2 × 2,9 mm Standoff
• 1 × 1,7 mm Phillips
• 2 × 2,8 mm Standoff

1. Disconnect all connectors from the logic board. They connect for example the charging socket, the flash, the front camera and the volume keys.
2. One contact is under one of the front camera cables. Carefully bend the cable to the side and lever off the connector.
3. Then loosen the screws of the motherboard.
4. Then carefully bend all flex cables to the side and remove the logic board.

Next to the opening for the camera is a plastic holder for a screw (top left in the picture). This plastic holder has to be placed over the logic board again later.