Disconnecting the battery

• 3 × 1,2 mm Y-Type
• Battery connector

Before starting the repair, disconnect the battery contact to prevent short circuits and avoid accidentally turning on your device during the repair.

1. Use a Y-Type screwdriver (Y000) to remove the Y-Type screws. Then take off the bracket plate. Put all the parts on the same field of your magnetic pad.

Apple introduced Y-Type screws with the iPhone 7. They are often wrongly called Tri-Point or Tri-Wing. Use a matching Y-Type screwdriver for these screws so you don't strip the screw heads.

2. Now very carefully pry off the battery contact by inserting a spudger under the connector.