Connecting the display

• Earpiece connector
• 3 × 1,2 mm Y-Type
• 1 × 1,5 mm Phillips
• 1 × 1,3 mm Phillips
• Display connector
• 2 × 1,2 mm Y-Type

1. Put the display next to the device in place.

When connecting the connectors, make sure the connectors are seated correctly and don't slide them over the sockets on the logic board to avoid damaging the contacts.

1. Connect the earpiece connector, put the cover plate on and screw it on.

To connect the other connectors, lean the display against a stable object. In this way you avoid stretching the sensitive flex cables too far.

1. Connect the two display connectors.
2. Put on the small cover plate and screw it on.