Removing the earpiece

• 1 × 1,5 mm Phillips-Schraube
• 2 × 2,5 mm Phillips-Schraube
• 1 × 2,2 mm Phillips-Schraube
• 1 × 1,7 mm Phillips-Schraube

1. The earpiece is on the back of the display unit. Remove the three Phillips screws from the cover on the earpiece. Put all the parts in the same section of your magnetic pad.
2. Remove the two Phillips screws holding the earpiece in place.
3. The earpiece is under the front camera’s flexible flat cable. Fold the cable slightly to the side so you can remove the earpiece.

Note that the screws have different lengths. Mixing them up could cause damage to the display during assembly.