Removing the Taptic Engine
Apple iPhone 7 Plus
-
- 1 × 2,9 mm Phillips
- 1 × 2,1 mm Phillips
- 3 × 1,5 mm Phillips
- Remove the two Phillips screws in the plastic bracket using a Phillips screwdriver (PH00).
- Use a spudger to disconnect the Taptic Engine connector.
- Use a Phillips screwdriver (PH00) to remove the three Phillips screws holding the Taptic Engine in place.
- Now remove the Taptic Engine.
6 verwandte Anleitungen
Der Schritt wird dir in diesen Anleitungen angezeigt