Disconnecting the battery

• 1 × 2,4 mm Y-Type
• 3 × 1,1 mm Y-Type
• Battery Connector

Before starting the repair, disconnect the battery contact to prevent short circuits and avoid accidentally turning on your device during the repair.

1. Remove the three Y-Type screws using a Y-Type screwdriver (Y000) and lift off the bracket plate. Put all the parts in the same box of your magnetic pad.
2. Now carefully pry off the battery connector by carefully inserting a spudger under it. If you don’t have a spudger, you can also try using your fingernail.