Removing the Home button

1. Remove the Phillips screw (see figure 1). There’s also a little metal contact below it that usually gets caught on the cable set with the screw.
   
   1 x 2.0 mm Phillips screw
2. Remove the two equally sized Phillips screws (see figure 2). Now remove the silver cover. Put everything in the same compartment of your organizer tray.
   2 x 1.4 mm Phillips screws
3. Carefully insert the pointed tip of the laboratory spatula below the cable set, which is generally glued in place, to detach it (see figure 3).
4. The Home button is glued to the screen from the inside. Carefully remove the rubber coating using the spudger to avoid scratching the screen from the inside (see figure 4). You can also press in the Home button from the front side (see figure 5).